Product Overview

Crafted from premium Jade Gold Quartzite, these wall panels combine natural elegance with exceptional durability. Sourced from extra-large full-size stone slabs, they are perfect for feature walls, accent walls, backsplashes, fireplace surrounds, and shower enclosures.

Key Features

Raw Material Quality

• Cut from premium full-size slabs for consistent color and veining patterns.
• Available in multiple thicknesses:
  • 2 cm (3/4 inches) – ideal for feature walls and accent walls.
  • 1 cm (3/8 inches) or 12 mm (1/2 inches) – suitable for kitchen and bathroom backsplashes, floors, and fireplace tiles.

Prefabricated Sizes

• Standard Wall Panels: 8 ft x 4 ft (2.44 m x 1.22 m) – most common size.
• Extra-Large Panels: 10 ft x 6 ft (3.05 m x 1.83 m) or 12 ft x 6 ft (3.66 m x 1.83 m) – aluminum honeycomb reinforced for stability.
• Feature/Accent Wall Slabs: Irregular sizes available; consult our team for expert advice on handling and reinforcement.
• Shower/Tub Surrounds: 60 x 30 inches, 72 x 30 inches, or full-size 8 ft x 30 inches.

Thickness Options (3/4 inch slabs)

• 1 ft: 1 x 1 ft
• 2 ft: 2 x 2, 2 x 3, 2 x 4, 2 x 5, 2 x 8 ft
• 3 ft: 3 x 12, 3 x 3, 3 x 4, 3 x 5, 3 x 6 ft
• 4 ft: 4 x 2, 4 x 5, 4 x 6, 4 x 8 ft

Inch-Based Sizes

• 16 x 16, 16 x 24 inches
• 18 x 18, 18 x 36 inches
• 24 x 24, 24 x 36, 24 x 48 inches
• 48 x 48 inches

Metric Sizes

• 30 x 30 cm, 30 x 60 cm, 36 x 36 cm
• 400 x 400 mm
• 450 x 450 mm
• 600 x 300 mm, 600 x 600 mm, 600 x 900 mm, 1200 x 900 mm, 900 x 900 mm, 900 x 600 mm, 90 x 90 cm

Surface Textures

• Polished: Shiny gloss finish for a modern, reflective look.
• Matte/Honed: Smooth, antique-style surface with a soft sheen.
• Patterned Finishes: Splitface, brushed, tumbled, fluted, sandblast, or flamed – adds visual and tactile appeal.
• Marble-Look Effect: Mimics the elegance of genuine marble, ideal for engineered or faux marble applications.

Custom Edge Options

• Standard: Flat polished edge.
• Premium Edges: Beveled, ogee, bullnose, mitered, or laminate bullnose.
• Versatile Use: Suitable for corners or junctions with materials like solid wood (oak, cherry, maple), cultured marble, or stainless steel.

Installation Guide

Tools You Will Need

• Diamond-tipped wet saw or angle grinder for precise cuts
• Notched trowel (1/4-inch or 3/8-inch) for adhesive application
• Rubber mallet for gentle tapping to level panels
• Spirit level and measuring tape for alignment
• Spacers to maintain even gaps between panels
• Bucket, sponge, and clean cloths for cleanup
• Safety goggles, gloves, and dust mask for protection

Materials Required

• High-quality thin-set mortar or stone adhesive (flexible for quartzite)
• Grout (matching or contrasting color, epoxy recommended for durability)
• Sealer (penetrating sealer for natural stone, pre-seal if needed)
• Backer board or cement board for stable substrate
• Screws and anchors for securing backer board (if on drywall)

Site Preparation Steps

1. Ensure the wall surface is clean, dry, and free of dust, grease, or old paint.
2. Repair any cracks or uneven areas with patching compound; sand smooth.
3. Apply a primer to porous surfaces to improve adhesion.
4. Install cement backer board over drywall or plywood for moisture resistance, screwing every 6 inches.
5. Mark layout lines on the wall using a level and chalk line to ensure straight installation.
6. Pre-cut panels to fit edges, corners, or outlets using a wet saw to minimize chipping.
7. Dry-fit panels on the floor to check pattern and alignment before applying adhesive.

Installation Tips

• Mix thin-set mortar according to manufacturer instructions; apply with notched trowel in small sections.
• Press each panel firmly into place, using spacers for consistent gaps.
• Tap gently with a rubber mallet to level; check with spirit level frequently.
• Allow mortar to cure for 24-48 hours before grouting.
• Apply grout with a rubber float, wiping excess with a damp sponge.
• Seal the quartzite after grout dries to protect against stains and moisture.

Why Choose Our Panels?

• Natural stone authenticity with unique gold veining.
• Durable and easy to maintain.
• Customizable sizes and finishes to fit any design.
• Expert support for large or complex installations.
• Perfect for feature walls, backsplashes, or accent areas.